Interested in FANUC Robot Training?

Contact us to receive more information for training on FANUC robots. We'll be happy to answer any questions you may have, simply click below to get started.

Contact Us

FANUC Training Terms and Conditions


FANUC AMERICA CORPORATION STANDARD TERMS AND CONDITIONS OF SALE

The following terms and conditions shall apply to any and all sales of goods and services by FANUC America Corporation (hereinafter FANUC). Any suggested exceptions shall be submitted in writing and shall not be effective unless agreed to by FANUC in writing. Any attempt to substitute or add any additional or conflicting terms and conditions is hereby expressly rejected, and shall be of no force or effect. If there exists a conflict between these terms and conditions and a term or condition set forth in the body of the proposal of which this is a part, the term or condition in the body of the proposal will control. NOTE: FANUC’s Invoice Schedule and Payment Terms as defined below are subject to the final approval of FANUC’s Finance Department; FANUC reserves the right to modify the Invoice Schedule and Payment Terms as a result of ongoing credit review. Any deviation from these standard terms may affect other quoted terms, including without limitation, price and/or delivery.

Pricing and Terms of Payment


All prices are in United States Currency, and do not include any taxes, duties, freight charges, or fees unless specifically itemized in this proposal. The Purchaser must provide to FANUC a valid tax exemption certificate, if not, FANUC reserves the right to charge the Purchaser sales tax, goods and services tax and/or other transaction tax/duty/fee applicable to this purchase. The prices are firm for a period of sixty (60) days, after which such prices are subject to change.

Payment


All invoices shall be due upon receipt. FANUC may charge interest on all and any amounts unpaid after invoice due date. Such interest shall be at the rate of the lesser of (a) one and one half percent (1.5%) per month or part thereof; or (b) the highest rate allowed by law.

When required by FANUC, Purchaser shall issue an Irrevocable Letter of Credit (LOC) in favor of FANUC in the amount of 100% of the purchase price. The LOC is to be issued by a bank or other financial institution, approved by FANUC, within thirty (30) days from the date Purchaser places its purchase order with FANUC. The LOC shall be valid until 100% of the Price is paid to FANUC.

Payment for training services is due prior to attendance at the training session. FANUC reserves the right to refuse entry into a class if payment prior to attending has not been made. Payment may be made by check or credit card. Remit check payments to: FANUC America Corporation, 28583 Network Place, Chicago, IL 60673-1285.

Training Cancellation


  • Rescheduling of a registration is done at no charge if FANUC America is notified in writing at least three weeks prior to the start of training.
  • Cancellation of students must be received in writing and sent to training.group@fanucamerica.com
  • Cancellation within three weeks of the class start date is invoiced in full and subject to a 30% rescheduling fee.
  • Cancellation within two weeks of the class start date is invoiced in full and subject to a 50% rescheduling fee.
  • The full fee will be charged for those who fail to attend without notification of cancellation.

All cancellations must be in writing and emailed to training.group@fanucamerica.com.
FANUC Authorized Service Integrator (ASI) cancellation policy can be found at the cRc website.

Training Rescheduling


  • Rescheduling of a registration is done at no charge if FANUC is notified with a minimum of two weeks advance notice.
  • Rescheduling is subject to a fee equal to 50% of the course tuition if notice is received with less than two weeks advance notice.
  • A training voucher will be issued upon cancellation that must be used within a period of six months of issue.  Unused vouchers will not be subject to a refund.
  • The full fee will be charged for students who fail to attend the class without any advance notice.

FANUC reserves the right to cancel or modify classes at any time.

Warranty


FANUC warrants to Purchaser that all goods supplied hereunder, which are manufactured by either FANUC or FANUC CORPORATION, will be free from defect in material or workmanship for a period of one (1) year from the delivery date unless a different period is set forth in the body of the proposal in which these terms are incorporated.

Should any defect appear during the warranty period, FANUC shall, if given prompt notice by Purchaser, correct such nonconformity by, in FANUC’s sole discretion, either (i) repair at the jobsite, or (ii) repair or replacement of the nonconforming goods F.O.B. FANUC’s designated repair facility.

The foregoing warranties are subject to revocation in FANUC’s sole discretion in the event that Purchaser (1) modifies the goods in any way without the express written consent of FANUC; (2) employs such goods in a manner that is not in accordance with FANUC’s supplied instructions; or (3) damages the goods in any manner through any means.

The foregoing warranties also are subject to revocation or modification in FANUC’s sole discretion in the event that Purchaser uses or transfers the goods outside of the country from which they were sold without notice to and written consent from FANUC. In such event, FANUC may charge Purchaser, at prevailing prices, for all travel, labor, and parts necessary to service such goods.

Repair parts are warranted by FANUC for a period of one (1) year from the date of delivery, provided, however, that repairs or replacements to original goods shall not renew or extend the warranty period of such goods. Replaced goods or parts become the property of FANUC. Goods supplied hereunder, which have been purchased by FANUC from manufacturers other than FANUC CORPORATION, shall have only the warranty offered by the manufacturer thereof, and FANUC disclaims any responsibility with respect to the performance of such goods. Service labor provided by FANUC is warranted by FANUC for a period of ninety (90) days from the date that the Field Service Report is executed.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF QUALITY OR PERFORMANCE, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.

Limit of Liability 


EXCEPT AS PROVIDED IN THE SECTION ENTITLED "PATENT AND COPYRIGHT INDEMNITY", FANUC SOLE AND EXCLUSIVE LIABILITY HEREUNDER SHALL BE TO REPAIR OR REPLACE GOODS OR PARTS THEREOF FOUND TO BE DEFECTIVE WITHIN THE WARRANTY PERIOD. IN NO EVENT SHALL FANUC BE LIABLE TO PURCHASER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER IN CONTRACT, TORT, OR OTHERWISE, INCLUDING BUT NOT LIMITED TO DAMAGES RELATED TO LOSS OF PROFITS OR REVENUE, LOSS OF USE OF THE GOODS OR ANY ASSOCIATED EQUIPMENT, COST OF SUBSTITUTE GOODS, DOWNTIME COSTS, OR OTHER DAMAGES TO PURCHASER OR ITS CUSTOMERS.

Inventions 


Purchaser acknowledges and agrees that any and all ideas, discoveries, concepts, and improvements, whether patentable or not, made during the performance of this Agreement shall be solely owned by FANUC. Purchaser agrees to cooperate, at FANUC’s expense, in the preparation, filing, and prosecution of patent applications relating to inventions conceived and/or reduced to practice as a result of FANUC’s performance under this Agreement.

Force Majeure


Neither FANUC nor Purchaser shall have any liability to the other or to third parties for any failure or delay in performing any obligation under this Agreement due to circumstances beyond its reasonable control including, without limitation, acts of God or nature, act of government or insurrections, fires, floods, tornadoes, strikes (including labor trouble or other industrial disturbance), war, acts of terrorism, embargoes or blockades, legal restrictions, or power, communication, satellite or network failures.

Safety Compliance


While in any FANUC facility, Purchaser shall adhere to all government safety laws and environmental regulations, as well as comply with all FANUC safety policies, procedures and guidelines, including without limitation, wearing appropriate eye protection, steel-toed safety shoes, and other protective clothing, gear or devices for any hazardous operation.

Compliance with Laws


Purchaser will comply with any and all laws and regulations applicable to the use, transportation, re-sale or export of the goods, services and/or technology provided by FANUC, and acknowledges that export or re-export of such items may require that Purchaser obtain an export license from the appropriate authority. Purchaser is further prohibited from using the goods, services and/or technology provided by FANUC for the development, production, use or stockpiling of weapons of mass destruction (nuclear weapons, biological weapons, chemical weapons or missiles).

Choice of Law and Jurisdiction


These terms and conditions shall be construed according to the law of, and any dispute shall be decided in, the State of Michigan.

FANUC does not permit anyone to film, record, videotape or photograph any and all training sessions conducted by FANUC, or any Authorized Representative.

We're here to help you when you need FANUC Robot training.
Fill out the form below and a knowledgeable FANUC training representative will be in touch.