• 09/24/2022 thru 3/7/2023
  • (Schedule was last updated - 9/24/2022)
  • To register for one of these classes, please click on Course Registration, or call the cRc Training Department at 1-888-FANUC-US. If our schedule does not meet your needs, please contact our Training Group or call 1-888-FANUC-US to discuss alternatives.
Training Schedule by Course
 Start/End datesStart/End timesTraining HoursSeats AvailableState
(ADVIRV-2D) Advanced iRVision Operation and Programming - 2D
   01/30/2023 - 02/03/2023 8:00 AM- 4:30 PM 4011Rochester Hills, MI
   03/03/2023 - 03/07/2023 8:00 AM- 4:30 PM 4012Rochester Hills, MI
(ADVTPP) Advanced TPP Programming
   09/26/2022 - 09/30/2022 8:00 AM- 4:30 PM 401Houston, TX
   10/03/2022 - 10/07/2022 8:00 AM- 4:30 PM 405Mason, OH
   10/17/2022 - 10/21/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   10/24/2022 - 10/28/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   10/31/2022 - 11/04/2022 8:00 AM- 4:30 PM 401Mason, OH
   11/14/2022 - 11/18/2022 8:00 AM- 4:30 PM 400Houston, TX
   11/28/2022 - 12/02/2022 8:00 AM- 4:30 PM 407Huntersville, NC
   12/05/2022 - 12/09/2022 8:00 AM- 4:30 PM 400Mason, OH
   01/23/2023 - 01/27/2023 8:00 AM- 4:30 PM 401Houston, TX
   01/23/2023 - 01/27/2023 8:00 AM- 4:30 PM 404Mason, OH
(ADVTPP-VT) Advanced TPP Programming - Instructor Led Virtual Training
   09/26/2022 - 09/30/2022 9:00 AM- 5:00 PM 401Virtual Training
   12/12/2022 - 12/16/2022 9:00 AM- 5:00 PM 400Virtual Training
   12/19/2022 - 12/23/2022 9:00 AM- 5:00 PM 4010Virtual Training
   01/02/2023 - 01/06/2023 9:00 AM- 5:00 PM 408Virtual Training
   02/13/2023 - 02/17/2023 9:00 AM- 5:00 PM 406Virtual Training
(MTDM10IA) ArcMate 100iC or M-10iA Robot Disassembly/Reassembly
   10/31/2022 - 11/01/2022 8:00 AM- 4:30 PM 161Rochester Hills, MI
(MTDM20IA) ArcMate 120iC or M-20iA Robot Disassembly/Reassembly
   10/31/2022 - 11/01/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
(J2P0410-5) ArcTool Operation & Programming-5
   10/24/2022 - 10/28/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   11/07/2022 - 11/11/2022 8:00 AM- 4:30 PM 402Rochester Hills, MI
(J2P0410-VT) ArcTool Operations & Programming - Instructor Led Virtual Training
   10/10/2022 - 10/14/2022 9:00 AM- 5:00 PM 401Virtual Training
(CRX-COBOT) CRX-Series Collaborative Robot Operations and Programming
   10/10/2022 - 10/12/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   10/10/2022 - 10/12/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   10/24/2022 - 10/26/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   11/02/2022 - 11/04/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   11/16/2022 - 11/18/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   11/30/2022 - 12/02/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   11/30/2022 - 12/02/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   12/05/2022 - 12/07/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   12/14/2022 - 12/16/2022 8:00 AM- 4:30 PM 247Rochester Hills, MI
   01/03/2023 - 01/05/2023 8:00 AM- 4:30 PM 248Rochester Hills, MI
(J2P0210) DispenseTool Operation and Programming
   02/20/2023 - 02/23/2023 8:00 AM- 4:30 PM 3210Rochester Hills, MI
(DCS0310-3) Dual Check Safety V7.50 & Newer
   10/12/2022 - 10/14/2022 8:00 AM- 4:30 PM 241Houston, TX
   10/19/2022 - 10/21/2022 8:00 AM- 4:30 PM 241Mason, OH
   11/09/2022 - 11/11/2022 8:00 AM- 4:30 PM 247Mississauga, ON
   12/12/2022 - 12/14/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   01/11/2023 - 01/13/2023 8:00 AM- 4:30 PM 240Mason, OH
   01/11/2023 - 01/13/2023 8:00 AM- 4:30 PM 244Houston, TX
(DCS0310-VT) Dual Check Safety V7.50 & Newer - Instructor Led Virtual Training
   10/03/2022 - 10/05/2022 9:00 AM- 5:00 PM 240Virtual Training
   10/19/2022 - 10/21/2022 9:00 AM- 5:00 PM 240Virtual Training
   11/28/2022 - 11/30/2022 9:00 AM- 5:00 PM 247Virtual Training
   01/17/2023 - 01/19/2023 9:00 AM- 5:00 PM 240Virtual Training
(R30IB0250) Electrical Maintenance with R-30iB & R-30iB Plus Controller
   10/24/2022 - 10/27/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/07/2022 - 11/10/2022 8:00 AM- 4:30 PM 320Mason, OH
   12/12/2022 - 12/15/2022 8:00 AM- 4:30 PM 320Mason, OH
   01/30/2023 - 02/02/2023 8:00 AM- 4:30 PM 320Mason, OH
   01/30/2023 - 02/02/2023 8:00 AM- 4:30 PM 320Houston, TX
   02/20/2023 - 02/23/2023 8:00 AM- 4:30 PM 320Mason, OH
(PRO0310-2) HandlingPRO Intro Plus (RoboGuide)
   10/13/2022 - 10/14/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/31/2022 - 11/01/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   12/01/2022 - 12/02/2022 8:00 AM- 4:30 PM 167Rochester Hills, MI
   12/12/2022 - 12/13/2022 8:00 AM- 4:30 PM 167Rochester Hills, MI
   01/05/2023 - 01/06/2023 8:00 AM- 4:30 PM 165Rochester Hills, MI
   02/16/2023 - 02/17/2023 8:00 AM- 4:30 PM 168Rochester Hills, MI
(HPRO310-VT) HandlingPRO Intro Plus (RoboGuide) - Instructor Led Virtual Training
   09/26/2022 - 09/28/2022 9:00 AM- 5:00 PM 241Virtual Training
   10/03/2022 - 10/05/2022 9:00 AM- 5:00 PM 240Virtual Training
   01/02/2023 - 01/04/2023 9:00 AM- 5:00 PM 240Virtual Training
   01/23/2023 - 01/25/2023 8:00 AM- 4:30 PM 240Virtual Training
   01/23/2023 - 01/25/2023 8:00 AM- 4:30 PM 240Virtual Training
(J2P0310) HandlingTool Operation and Programming
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Huntersville, NC
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Huntersville, NC
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Mason, OH
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/03/2022 - 10/06/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/03/2022 - 10/06/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/03/2022 - 10/06/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/03/2022 - 10/06/2022 8:00 AM- 4:30 PM 320Huntersville, NC
   10/10/2022 - 10/13/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/10/2022 - 10/13/2022 8:00 AM- 4:30 PM 320Huntersville, NC
   10/17/2022 - 10/20/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/17/2022 - 10/20/2022 8:00 AM- 4:30 PM 320Hoffman Estates, IL
   10/17/2022 - 10/20/2022 8:00 AM- 4:30 PM 320Huntersville, NC
   10/17/2022 - 10/20/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/18/2022 - 10/21/2022 8:00 AM- 4:30 PM 320Mississauga, ON
   10/24/2022 - 10/27/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/24/2022 - 10/27/2022 8:00 AM- 4:30 PM 320Mason, OH
   10/24/2022 - 10/27/2022 8:00 AM- 4:30 PM 3211Hoffman Estates, IL
   10/31/2022 - 11/03/2022 8:00 AM- 4:30 PM 3212Rochester Hills, MI
   10/31/2022 - 11/03/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/07/2022 - 11/10/2022 7:30 AM- 4:30 PM 320Tanner, AL
   11/07/2022 - 11/10/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/07/2022 - 11/10/2022 8:00 AM- 4:30 PM 320Houston, TX
   11/08/2022 - 11/11/2022 8:00 AM- 4:30 PM 320Lake Forest, CA
   11/14/2022 - 11/17/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/14/2022 - 11/17/2022 8:00 AM- 4:30 PM 320Mason, OH
   11/14/2022 - 11/17/2022 8:00 AM- 4:30 PM 320Huntersville, NC
   11/28/2022 - 12/01/2022 8:00 AM- 4:30 PM 3211Rochester Hills, MI
   11/28/2022 - 12/01/2022 8:00 AM- 4:30 PM 323Rochester Hills, MI
   11/29/2022 - 12/02/2022 8:00 AM- 4:30 PM 320Mason, OH
   11/29/2022 - 12/02/2022 8:00 AM- 4:30 PM 322Mississauga, ON
   12/05/2022 - 12/08/2022 8:00 AM- 4:30 PM 3213Rochester Hills, MI
   12/05/2022 - 12/08/2022 8:00 AM- 4:30 PM 3213Huntersville, NC
   12/12/2022 - 12/15/2022 8:00 AM- 4:30 PM 3215Hoffman Estates, IL
   12/12/2022 - 12/15/2022 8:00 AM- 4:30 PM 3215Rochester Hills, MI
   12/12/2022 - 12/15/2022 8:00 AM- 4:30 PM 326Rochester Hills, MI
   01/02/2023 - 01/05/2023 8:00 AM- 4:30 PM 327Houston, TX
   01/10/2023 - 01/13/2023 8:00 AM- 4:30 PM 3210Mississauga, ON
   01/17/2023 - 01/20/2023 8:00 AM- 4:30 PM 320Houston, TX
   01/24/2023 - 01/27/2023 8:00 AM- 4:30 PM 320Lake Forest, CA
   01/30/2023 - 02/02/2023 8:00 AM- 4:30 PM 3216Rochester Hills, MI
(J2P0310-VT) HandlingTool Operations & Programming - Instructor Led Virtual Training
   09/26/2022 - 09/29/2022 9:00 AM- 5:00 PM 320Virtual Training
   09/26/2022 - 09/29/2022 9:00 AM- 5:00 PM 320Virtual Training
   10/03/2022 - 10/06/2022 9:00 AM- 5:00 PM 322Virtual Training
   10/17/2022 - 10/20/2022 9:00 AM- 5:00 PM 320Virtual Training
   10/31/2022 - 11/03/2022 9:00 AM- 5:00 PM 320Virtual Training
   11/14/2022 - 11/17/2022 9:00 AM- 5:00 PM 320Virtual Training
   11/28/2022 - 12/01/2022 9:00 AM- 5:00 PM 320Virtual Training
   12/19/2022 - 12/22/2022 9:00 AM- 5:00 PM 320Virtual Training
   12/19/2022 - 12/22/2022 9:00 AM- 5:00 PM 327Virtual Training
(IRPKTL) iRPickTool Operations & Programming w/iRPickPRO
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/14/2022 - 11/17/2022 8:00 AM- 4:30 PM 321Rochester Hills, MI
(KAREL-OP-VT) KAREL Operations and Programming - Instructor Led Virtual Training
   10/17/2022 - 10/21/2022 9:00 AM- 5:00 PM 400Virtual Training
   11/28/2022 - 12/02/2022 9:00 AM- 5:00 PM 401Virtual Training
   01/02/2023 - 01/06/2023 9:00 AM- 5:00 PM 403Virtual Training
(MTDLR200ID) LR Mate 200iD Mechanical Disassembly/Reassembly
   10/03/2022 - 10/04/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/20/2022 - 10/21/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   11/02/2022 - 11/03/2022 8:00 AM- 4:30 PM 161Rochester Hills, MI
(MTD410IB) M-410iB Robot Disassembly/Reassembly
   10/24/2022 - 10/27/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
(MTDM710IC) M-710iC Robot Disassembly/Reassembly
   10/05/2022 - 10/06/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/05/2022 - 10/06/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/13/2022 - 10/14/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/19/2022 - 10/20/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/19/2022 - 10/20/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
(MTDP250) P-250 Robot Disassembly/Reassembly
   01/30/2023 - 01/31/2023 8:00 AM- 4:30 PM 167Rochester Hills, MI
(MTDP700I) P-700i Mechanical Disassembly/Reassembly
   10/10/2022 - 10/12/2022 8:00 AM- 4:30 PM 241Rochester Hills, MI
   02/01/2023 - 02/03/2023 8:00 AM- 4:30 PM 244Rochester Hills, MI
(R30IBEP550) Paint Electrical Maintenance with R-30iB Controller
   12/12/2022 - 12/15/2022 8:00 AM- 4:30 PM 324Rochester Hills, MI
(PRO0510) PaintPRO (Automotive Assembly)
   10/24/2022 - 10/25/2022 8:00 AM- 4:30 PM 164Rochester Hills, MI
(PRO0511) PaintPRO 24 HR (General Industry)
   10/26/2022 - 10/28/2022 8:00 AM- 4:30 PM 243Rochester Hills, MI
(PRO0511-VT) PaintPRO General Industry - Instructor Led Virtual Training
   09/28/2022 - 09/30/2022 9:00 AM- 5:00 PM 244Virtual Training
(J2P0510) PaintTool Operation and Programming
   10/10/2022 - 10/13/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/10/2022 - 10/13/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/10/2022 - 10/13/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   01/09/2023 - 01/12/2023 8:00 AM- 4:30 PM 328Rochester Hills, MI
(J2P0510-VT) PaintTool Operations and Programming - Instructor Led Virtual Training
   11/14/2022 - 11/17/2022 9:00 AM- 5:00 PM 3210Virtual Training
(ADV0710T) PalletTool Setup & Programming
   11/07/2022 - 11/10/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/29/2022 - 12/02/2022 8:00 AM- 4:30 PM 321Rochester Hills, MI
   12/05/2022 - 12/08/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   01/09/2023 - 01/12/2023 8:00 AM- 4:30 PM 324Rochester Hills, MI
(ADV0710T-VT) PalletTool Setup & Programming - Instructor Led Virtual Training
   10/17/2022 - 10/19/2022 9:00 AM- 5:00 PM 240Virtual Training
(MTDR2000I) R-2000i Mechanical Disassembly/Reassembly
   10/17/2022 - 10/19/2022 8:00 AM- 4:30 PM 242Rochester Hills, MI
   12/12/2022 - 12/14/2022 8:00 AM- 4:30 PM 242Rochester Hills, MI
(RBT-PLCAB-SYS) Robot and PLC (AB) System Integration
   10/03/2022 - 10/07/2022 8:00 AM- 4:30 PM 401Rochester Hills, MI
   10/10/2022 - 10/14/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   10/31/2022 - 11/04/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   01/30/2023 - 02/03/2023 8:00 AM- 4:30 PM 400Rochester Hills, MI
   01/30/2023 - 02/03/2023 8:00 AM- 4:30 PM 400Rochester Hills, MI
   02/06/2023 - 02/10/2023 8:00 AM- 4:30 PM 400Rochester Hills, MI
(J2P0305) Robot Operations
   09/26/2022 - 09/27/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   10/10/2022 - 10/11/2022 8:00 AM- 4:30 PM 168Hoffman Estates, IL
   10/10/2022 - 10/11/2022 8:00 AM- 4:30 PM 160Houston, TX
   10/12/2022 - 10/13/2022 8:00 AM- 4:30 PM 1615Hoffman Estates, IL
   10/17/2022 - 10/18/2022 8:00 AM- 4:30 PM 161Mason, OH
   10/27/2022 - 10/28/2022 8:00 AM- 4:30 PM 160Rochester Hills, MI
   11/07/2022 - 11/08/2022 8:00 AM- 4:30 PM 161Huntersville, NC
   11/07/2022 - 11/08/2022 8:00 AM- 4:30 PM 169Mississauga, ON
   11/07/2022 - 11/08/2022 8:00 AM- 4:30 PM 161Huntersville, NC
   11/14/2022 - 11/15/2022 8:00 AM- 4:30 PM 1613Rochester Hills, MI
   11/28/2022 - 11/29/2022 8:00 AM- 4:30 PM 1615Rochester Hills, MI
   01/09/2023 - 01/10/2023 8:00 AM- 4:30 PM 160Houston, TX
   01/09/2023 - 01/10/2023 8:00 AM- 4:30 PM 1613Mason, OH
(J2P0305-VT) Robot Operations - Instructor Led Virtual Training
   10/06/2022 - 10/07/2022 9:00 AM- 5:00 PM 160Virtual Training
   11/21/2022 - 11/22/2022 9:00 AM- 5:00 PM 160Virtual Training
(J2P0610SG-VT) SpotTool Operation & Programming w/Servo Gun - Instructor Led Virtual Training
   12/12/2022 - 12/16/2022 9:00 AM- 5:00 PM 407Virtual Training
(J2P0610SG) SpotTool Operation and Programming with Servo Gun
   10/03/2022 - 10/07/2022 8:00 AM- 4:30 PM 404Rochester Hills, MI
   10/10/2022 - 10/14/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   10/31/2022 - 11/04/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   11/07/2022 - 11/11/2022 8:00 AM- 4:30 PM 406Rochester Hills, MI
(SR-SCARA) SR-Series (SCARA) Robot Operations and Maintenance
   09/26/2022 - 09/30/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   11/07/2022 - 11/11/2022 8:00 AM- 4:30 PM 400Rochester Hills, MI
   01/30/2023 - 02/03/2023 8:00 AM- 4:30 PM 402Rochester Hills, MI
(IRVISION-2DR30IBPLUS) V-iRVision Operation & Programming - 2D R30iB Plus
   10/11/2022 - 10/13/2022 8:00 AM- 4:30 PM 241Mason, OH
   11/21/2022 - 11/23/2022 8:00 AM- 4:30 PM 240Houston, TX
   01/03/2023 - 01/05/2023 8:00 AM- 4:30 PM 240Mason, OH
(IRVISION-3DAS/3DVS) V-iRVision Operation & Programming - 3D Area Sensor/3D Vision Sensor
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   09/26/2022 - 09/29/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   10/31/2022 - 11/03/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/28/2022 - 12/01/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
   11/28/2022 - 12/01/2022 8:00 AM- 4:30 PM 320Rochester Hills, MI
(IRVISION-2D) V-iRVision Operation and Programming - 2D R30iB
   10/24/2022 - 10/26/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   11/14/2022 - 11/16/2022 8:00 AM- 5:00 PM 240Rochester Hills, MI
   12/05/2022 - 12/07/2022 8:00 AM- 4:30 PM 240Rochester Hills, MI
   01/09/2023 - 01/11/2023 8:00 AM- 4:30 PM 249Rochester Hills, MI
(IRVISION-3DL) V-iRVision Operation and Programming - 3DL
   11/17/2022 - 11/18/2022 8:00 AM- 4:30 PM 1611Rochester Hills, MI
   12/08/2022 - 12/09/2022 8:00 AM- 4:30 PM 165Rochester Hills, MI
   01/12/2023 - 01/13/2023 8:00 AM- 4:30 PM 1612Rochester Hills, MI
(IRVISION-2D-VT) V-iRVision Operations & Programming 2D R30iB - Instructor Led Virtual Training
   10/17/2022 - 10/19/2022 9:00 AM- 5:00 PM 240Virtual Training
   11/21/2022 - 11/23/2022 9:00 AM- 5:00 PM 248Virtual Training
   01/17/2023 - 01/19/2023 9:00 AM- 5:00 PM 248Virtual Training
   02/06/2023 - 02/08/2023 9:00 AM- 5:00 PM 2410Virtual Training
  • Class times may be affected by holidays and other issues.
    Please refer to your confirmation letter for specific class times.
  • To register for one of these classes, please click on Course Registration or call 888-FANUC-US.
  • We reserve the right to cancel or modify classes at any time.