CNC Basic eLearning

FANUC Usage & Operations

Course code: TRCOLP-131

Length
75 days
Classroom hours
600

8-hour FANUC CNC Fundamentals eLearn covering CNC controls, screen navigation, operator functions, basic G-code programming, and machine operation.

Request this course

Contact the training department for more details.

Target Audience: This course is intended for students of all experience levels who work with FANUC CNCs in a variety of roles, including operators, programmers, maintenance professionals, supervisors and engineers.

Prerequisites: None. (However, either this course or the FANUC Usage and Maintenance course (Instructor-Led, Onsite, Virtual, or eLearn) are used as a prerequisite for all FANUC Level II Programming courses).

Requirements:

  • A PC or tablet device with an Internet connection and headphones.
  • Use of a PC with FANUC Academic CNC Guide software (A08B-9010-J766#ZZ99 - To purchase this software package, contact CNC.Parts@fanucamerica.com) is recommended to enhance each student's learning experience by allowing screen navigation, function verification, and CNC program creation/debugging. (Note: This is a web based eLearn course, so no course manuals, worksheets and/or instructor guidance will be included.)

Course Objectives:

  • Explores the fundamentals, configurations, and operation of the FANUC 30i/31i/32i-B and 0i-F controls.
  • Provides in-depth FANUC CNC screen explanation.
  • Describes FANUC keyboard and machine operator panel functions.
  • Introduces basic G-code programming concepts.

Course Length: We estimate that students will average approximately 8 hours to complete this course, including time to study the materials, to take the tests, and to do the exercises. Actual time will vary, of course, based upon the student's prior experience and eLearning aptitude.

Email training@fanucamerica.com with any questions about Payment Methods and FANUC Training policies.

Recommended Courses

Training Path

See where this course fits in your learning journey.
  • FANUC CNC Training Paths

    The recommended order for FANUC CNC training, covering operation, programming and maintenance for machine tool users.

CRX Paint Setup Guide elearn
Basic
eLearning

CRX Paint Setup Guide elearn

CRX Paint eLearn covering CRX paint robot setup, paint plugins, paint teaching, tablet interface configuration, and paint application programming.

View CRX Paint Setup Guide elearn
Tablet Teach Pendant User Interface eLearn
Basic
eLearning

Tablet Teach Pendant User Interface eLearn (6 months)

Tablet TP Introduction eLearn covering Tablet TP setup, user interface navigation, program creation, execution, plugin functions, and basic robot operation.

5 hours 6 months access
View Tablet Teach Pendant User Interface eLearn (6 months)
CNC Guide Setup
Basic
eLearning

CNC Guide Setup

1‑hour CNC Guide setup training covering installation, machine composition setup, configuration, and preparation for FANUC virtual and eLearn CNC courses.

View CNC Guide Setup
FANUC Foundations
Basic
eLearning

FANUC Foundations

40-minute free FANUC CNC introduction covering machine configurations, control components, screen navigation, system fundamentals, and FANUC organization basics.

1 hours
View FANUC Foundations