Understanding the FANUC PMC System
Course code: TRCNC40-298
- Length
- 4 days
- Classroom hours
- 32
30-hour FANUC PMC Maintenance eLearn covering ladder logic, PMC signals, troubleshooting, backups, ladder editing, and machine tool diagnostics.
See course dates and enroll. A FANUC Academy login is required to register.
Target Audience: This course is intended for Customers tasked as maintenance professionals, application/support engineers and supervisors of a high experience level looking to develop and/or maintain FANUC PMCs which are the interface between the FANUC CNC and the Machine tool. [Other versions available: Instructor-Led, Virtual] (Onsite is available - contact FANUC Training for additional details)
Prerequisites: Successful completion of the FANUC Usage and Maintenance course (Instructor-Led, Onsite, Virtual, or eLearn). Students who have attended a prerequisite class more than four years in the past are required to pass a preparatory test prior to attending the class.
Requirements:
- A PC with an Internet connection. Second screen and headphones are recommended. (Note: This is a web based eLearn course, so no course manuals, worksheets and/or instructor guidance will be included.)
- A version of CNC Guide [Full (A08B-9010-J790#ZZ99) or Academic (A08B-9010-J766#ZZ99)] installed and setup with the "PMC Maintenance" Machine composition on the PC being used by the student. (To purchase one of these software packages, contact CNC.Parts@fanucamerica.com, and to install/setup the software, complete the free eLearn titled 'CNC Guide Setup', located in the Academy catalog.)
- A passing score of 80% on a single try is needed to complete this course.
Course Objectives:
- Explaining contact/coil and Function block logic
- Making and restoring Ladder and PMC parameter backups
- Comparing PMC software types and I/O hardware models
- Explaining FANUC PMC signals and Function blocks
- Troubleshooting Machine tool builder (MTB) alarms/messages
- Introducing ladder editing and development
Course Length: We estimate that students will average approximately 30 hours to complete this course, including time to study the materials, to take the tests, and to do the exercises. Actual time will vary, of course, based upon the student's prior experience and eLearning aptitude.
Email training@fanucamerica.com with any questions about Payment Methods and FANUC Training policies (i.e. Drop/Rescheduling Policies).
Prerequisites
Training Path
-
FANUC CNC Training Paths
The recommended order for FANUC CNC training, covering operation, programming and maintenance for machine tool users.
Where This Course Is Offered
Products Covered in This Course
CRX Paint Setup Guide elearn
CRX Paint eLearn covering CRX paint robot setup, paint plugins, paint teaching, tablet interface configuration, and paint application programming.
Tablet Teach Pendant User Interface eLearn (6 months)
Tablet TP Introduction eLearn covering Tablet TP setup, user interface navigation, program creation, execution, plugin functions, and basic robot operation.
CNC Guide Setup
1‑hour CNC Guide setup training covering installation, machine composition setup, configuration, and preparation for FANUC virtual and eLearn CNC courses.
FANUC Foundations
40-minute free FANUC CNC introduction covering machine configurations, control components, screen navigation, system fundamentals, and FANUC organization basics.