CNC Basic eLearning

CNC Dual Check Safety Principles

Course code: TRCOLI-421

Classroom hours
4

4-hour Dual Check Safety (DCS) eLearn providing an overview of safety principles, safe I/O, redundant monitoring, motor power cutoff, and DCS architecture.

Enroll at FANUC Academy

See course dates and enroll. A FANUC Academy login is required to register.

Dual Check Safety is FANUC's implementation of a Category 3 safety system and offers a high level of safety through redundant monitoring and duplicate paths of breaking power to the servo/spindle amplifier. This online presentation provides an overview of the four main safety principles that Dual Check Safety operates by:

  • Dual Channels of Safe I/O
  • Redundant Cut-Off of Motor Power
  • Dual Monitoring of Safe I/O
  • Dual Monitoring of Servo and Spindle Motors

Prerequisites: None

Requirements: No additional software is required for this course, just an Internet connection and a PC or tablet device.

Who Should Attend: Engineers who are designing with Dual Check Safety in mind and maintenance professionals who need to understand how it is implemented.

Estimated Time Required: We estimate that students will average approximately four hours to complete this course, including time to study the materials. Actual time will vary, of course, based upon the student's prior experience and eLearning aptitude.

Recommended Courses

Training Path

See where this course fits in your learning journey.
  • FANUC CNC Training Paths

    The recommended order for FANUC CNC training, covering operation, programming and maintenance for machine tool users.

Related Products

Products Covered in This Course

Explore the equipment and software you will work with.
CRX Paint Setup Guide elearn
Basic
eLearning

CRX Paint Setup Guide elearn

CRX Paint eLearn covering CRX paint robot setup, paint plugins, paint teaching, tablet interface configuration, and paint application programming.

View CRX Paint Setup Guide elearn
Tablet Teach Pendant User Interface eLearn
Basic
eLearning

Tablet Teach Pendant User Interface eLearn (6 months)

Tablet TP Introduction eLearn covering Tablet TP setup, user interface navigation, program creation, execution, plugin functions, and basic robot operation.

5 hours 6 months access
View Tablet Teach Pendant User Interface eLearn (6 months)
CNC Guide Setup
Basic
eLearning

CNC Guide Setup

1‑hour CNC Guide setup training covering installation, machine composition setup, configuration, and preparation for FANUC virtual and eLearn CNC courses.

View CNC Guide Setup
FANUC Foundations
Basic
eLearning

FANUC Foundations

40-minute free FANUC CNC introduction covering machine configurations, control components, screen navigation, system fundamentals, and FANUC organization basics.

1 hours
View FANUC Foundations