FANUC Setup, Programming & Machining
Course code: TRCNC40-301
- Length
- 4 days
- Classroom hours
- 32
4-day FANUC G-Code Programming for Milling training covering CNC navigation, part programming, feeds and speeds, offsets, machining processes, and canned cycles.
See course dates and enroll. A FANUC Academy login is required to register.
Target Audience: This course is intended for Customers tasked with Manufacturing/Process engineering, Programming, or manual Mill operation of any experience level looking to develop a better understanding of G-Code programming and Machining processes. Unlike the eLearn version of this course, the Instructor-Led version will incorporate a FANUC CNC connected to a PC with 3D machine visualization software to increase the efficiency of the part development process. [Other version available: eLearn]
Prerequisites: Successful completion of either the FANUC Usage and Operations eLearn course or the FANUC Usage and Maintenance course (Instructor-Led, Onsite, Virtual, or eLearn). Students who have attended a prerequisite class more than four years in the past are required to pass a preparatory test prior to attending the class.
Requirements:
- Dress Code - Appropriate business casual attire is required to attend any class at FANUC training facilities. No shorts, leggings, tank tops, or open-toe shoes are permitted.
- Learning Management System (LMS) access - Students must be able to log into the LMS site, academy.fanucamerica.com, while in class, to access the Pre-test, Post-test, and Course survey.
Course Objectives:
- Understanding FANUC CNC navigation and features
- Utilizing positioning and cutting commands to create a Part program
- Calculating Feedrates and Spindle speeds
- Properly setting up Work coordinates and Tool offsets
- Using advanced G-Code commands and Canned cycles to optimize a Part program
Course Length: 4-days (The course consists of classroom lectures and exercises where several Part programs will be created from engineering drawings and, at the end of the course, a specific part will be machined on a FANUC-controlled Mill. In addition to lab exercises, a pre-test and post-test are used to measure mastery of the objectives.)
FANUC America Training reserves the right to cancel or modify classes at any time.
Email training@fanucamerica.com with any questions about Payment Methods and FANUC Training policies (i.e. Drop/Rescheduling Policies).
Prerequisites
Training Path
-
FANUC CNC Training Paths
The recommended order for FANUC CNC training, covering operation, programming and maintenance for machine tool users.
Where This Course Is Offered
CRX Paint Setup Guide elearn
CRX Paint eLearn covering CRX paint robot setup, paint plugins, paint teaching, tablet interface configuration, and paint application programming.
Tablet Teach Pendant User Interface eLearn (6 months)
Tablet TP Introduction eLearn covering Tablet TP setup, user interface navigation, program creation, execution, plugin functions, and basic robot operation.
CNC Guide Setup
1‑hour CNC Guide setup training covering installation, machine composition setup, configuration, and preparation for FANUC virtual and eLearn CNC courses.
FANUC Foundations
40-minute free FANUC CNC introduction covering machine configurations, control components, screen navigation, system fundamentals, and FANUC organization basics.