Purge/Fluid Delivery System Maintenance 1K, 2K, or Waterborn One Application
Course code: PJPI0475
- Length
- 3 days
- Classroom hours
- 24
3-day Purge/Fluid Delivery Maintenance training covering PAINTworks systems, purge troubleshooting, fluid delivery hardware, pneumatic controls, calibration, and repair.
See course dates and enroll. A FANUC Academy login is required to register.
This 3 day course, primarily conducted at the customer's site, is designed to cover the basic concepts and procedures unique to the PAINTworks robotic painting system. It is limited to the robot’s air purging system and the mechanical aspects of the various paint process control systems. This information is intended to support a technician or skilled tradesperson (non-electrical), who may operate, troubleshoot, repair/replace and test the Robot Purge System and the Fluid Delivery System Hardware, including the applicator cleaner and all pneumatic circuits, used to dispense paint.
Course Objectives: Upon successful completion of this course, the student will be able to analyze system malfunctions, repair or replace the particular system hardware components and readjust or calibrate certain specific process control hardware.
More Specifically learners will:
- Determine the cause of a purge fault and replace the mechanical (non-electrical) component.
- Assist and direct maintenance activities involving fluid process control mechanical components.
- Test PaintTool pneumatic controlled processes
- Use the GUI related screens for pneumatic troubleshooting.
- Set up all necessary parameters for an atomizer
- Test, replace and then calibrate process control transducers.
- Effectively use all the GUI menus related to the control and maintenance of the PAINTworks III painting process.
Recommended safety procedures are integrated into all training exercises.
The course consists of lectures, demonstrations, and a series of lab exercises designed to reinforce what the student has learned.
Audience: This course is intended for the person who must maintain and support production operations requiring a functioning PaintWorks III robotic painting system.
Prerequisites: None. Knowledge of pneumatic symbols and devices and paintshop practices are helpful.
FANUC Dress Code Requirement: Appropriate business casual attire is required to attend any class at all FANUC training facilities. No shorts, leggings, tank tops, or open-toe shoes are permitted.
We reserve the right to cancel or modify classes at any time.
Contact Training@fanucamerica.com with any questions.
Training Path
-
FANUC Robotics Training Path
The recommended order for FANUC robot training, from operator basics through advanced programming, vision and maintenance.
Where This Course Is Offered
Products Covered in This Course
VersaBell Maintenance I
Half-day VersaBell applicator training covering operation, maintenance, disassembly, component replacement, troubleshooting, and repair procedures.
VersaBell Maintenance II
Half-day VersaBell II training covering applicator operation, maintenance, disassembly, component replacement, troubleshooting, and repair procedures.
P-700i Robot Mechanical Maintenance
3‑day mechanical maintenance training for P‑700iA/B and P‑20iA/P‑25iB robots covering diagnostics, repairs, component replacement, adjustments, and upkeep.
P-250 Robot Mechanical Maintenance
2‑day P‑250iB mechanical maintenance training covering diagnostics, component replacement, robot adjustments, preventive maintenance, and repair procedures.