Dual Check Safety R-50iA Controller
Course code: DCSV10-3
- Length
- 3 days
- Classroom hours
- 24
3-day DCS training for R-50iA robots (V10.10+), covering safety setup, position/speed checks, safe I/O, user models, and DCS configuration.
See course dates and enroll. A FANUC Academy login is required to register.
This 3-day (24 hours) course covers the tasks that a technician, programmer or engineer would need to setup and use FANUC's Dual Check Safety (DCS) software. This class is specific to robots with version 10 and newer software.
Target Audience: This course is intended for the person who must set up or operate a FANUC robot (R-50iA V10.10 or newer) with DCS software installed.
Prerequisites: Completion of a live, FANUC instructor-led Operation and Programming course (such as HandlingTool, ArcTool, or SpotTool). Completion of an online eLearn Operation and Programming course will not meet this Operation and Programming prerequisite. Students who have attended a class more than four years in the past are required to pass a preparatory test prior to attending the class. Students must be able to log into the Academy URL while in class, to access learning materials.
Course Objectives: Students successfully completing this course will be able to:
- Understand the DCS menus
- Setup and modify DCS General parameters
- Setup and modify DCS Position/Speed Check parameters
- Create user models and DCS frames
- Setup and modify DCS Safe I/O parameters
This course consists of lectures, chapter reviews, demonstrations, and a series of lab exercises designed to reinforce what the student has learned. In addition to lab exercises, a pre-test and a post-test are used to measure mastery of objectives.
Dress Code: Appropriate business casual attire is required to attend any class at all FANUC training facilities. No shorts, leggings, tank tops, or open-toe shoes are permitted.
PPE: is not required for this class.
We reserve the right to cancel or modify classes at any time. Click for Payment Methods and Drop/Rescheduling Policies. Email training@fanucamerica.com with any questions.
Prerequisites
Training Path
-
FANUC Robotics Training Path
The recommended order for FANUC robot training, from operator basics through advanced programming, vision and maintenance.
Where This Course Is Offered
Products Covered in This Course
CRX Paint Setup Guide elearn
CRX Paint eLearn covering CRX paint robot setup, paint plugins, paint teaching, tablet interface configuration, and paint application programming.
Tablet Teach Pendant User Interface eLearn (6 months)
Tablet TP Introduction eLearn covering Tablet TP setup, user interface navigation, program creation, execution, plugin functions, and basic robot operation.
CNC Guide Setup
1‑hour CNC Guide setup training covering installation, machine composition setup, configuration, and preparation for FANUC virtual and eLearn CNC courses.
FANUC Foundations
40-minute free FANUC CNC introduction covering machine configurations, control components, screen navigation, system fundamentals, and FANUC organization basics.