iRVision Operation and Programming R-30iB Plus 3DA/3DV
Course code: IRVISION-3DAS3DVS
- Length
- 4 days
- Classroom hours
- 32
This 4-day course (32 hours) covers the tasks that an operator, technician, engineer or programmer who must set up and/or troubleshoot FANUC iRVision 3DA/3DV Sensor processes and related tools on the R-30iB Plus controller (not the R-30iB).
See course dates and enroll. A FANUC Academy login is required to register.
This 4-day course (32 hours) covers the tasks that an operator, technician, engineer or programmer who must set up and/or troubleshoot FANUC iRVision 3DA/3DV Sensor processes and related tools on the R-30iB Plus controller (not the R-30iB). If you are not certain of your controller model, please take a picture of the front and send it to Training@fanucamerica.com to get confirmation.
Target Audience: This course is intended for the person who must setup, refine, adjust or configure an application processing vision data using A FANUC 3D Area Sensor or 3D Vision Sensor for the purpose of completing application development and deployment.
Course Objectives: Students successfully completing this course will be able to:
- Properly install both a 3DA Area Sensor and 3D Vision Sensor
- Setup and prepare both a 3D Area Sensor and 3D Vision Sensor for a Vision Process
- Identify how to Create and Execute an Automatic Re-Calculation of a Mounting Position
- Investigate and test 3D Tools to be used along with a 3DV Single-View Vision Process
- Successfully complete setup and test a 3DV Stitching Vision Process (FOV Expansion)
- Successfully complete setup and test a 3DV Stitching Vision Process (Interpolation)
- Successfully complete setup and test interference System data, Robot data, and Condition data
- Successfully complete setup and test a new Parts List Manager and Parts List
- Identify KAREL programs and argument of Interference Avoidance, the Parts List Manager, and the Parts List
Prerequisites:
- Completion of a live, FANUC instructor-led Operation and Programming course (such as HandlingTool, ArcTool, DispenseTool, SpotTool)
- Either a live FANUC instructor-led iRVision Operations and Programming-2D course or successful completion of the online "2D Opt-Out exam". Completion of an online eLearn Operation and Programming course will not meet this Operation and Programming prerequisite
- Students who have attended a class more than four years in the past are required to pass a preparatory test prior to attending the class.
Dress Code Requirement: Appropriate business casual attire is required to attend any class at FANUC training facilities. No shorts, leggings, tank tops, or open-toe shoes are permitted. PPE: Personal protective equipment is not required for this class.
We reserve the right to cancel or modify classes at any time.
Payment Methods and Drop/Rescheduling Policies. Email training@fanucamerica.com with any questions.
Training Path
-
FANUC Robotics Training Path
The recommended order for FANUC robot training, from operator basics through advanced programming, vision and maintenance.
Where This Course Is Offered
Products Covered in This Course
2D iRVision R30iB & R30iB PLUS (12 months)
Self-paced 2D iRVision eLearn covering vision system setup, camera calibration, single-view processes, robot programming, troubleshooting, and operation.
2D iRVision R30iB & R30iB PLUS (6 months)
Self-paced 2D iRVision eLearn covering vision system setup, camera calibration, single-view processes, robot programming, troubleshooting, and operation.
iRVision Operation and Programming R-30iB Plus 2D Advanced
5‑day advanced FANUC iRVision training covering vision tools, calibration, Snap in Motion, depalletizing, process setup, programming, and troubleshooting.
Advanced iRVision Operation and Programming - 2D
Advanced 2D iRVision training for R‑30iB controllers covering vision process creation, camera calibration, locator tools, data extraction, and robot programming.